Skip to content

projects/ janelia/ Mouse Joystick/

5v_to_3v3_tps73733

Block orb_weaver_private:5v_to_3v3_tps73733 placed in /power of camera-gpio-interface-pcb. Clean 3.3 V linear regulator from a 5 V input rail using the TI TPS73733 fixed 3.3 V 1 A LDO.

Lifecycle routed
Family none (a private block)
Placement anchor (-40, -15) mm, rotation 180°, front side
Sheet 5v_to_3v3_tps73733.kicad_sch; sheet pins: the library's arrangement
Drawing camera-gpio-interface-pcb-power-5v_to_3v3_tps73733.svg

On the Board

5v_to_3v3_tps73733 on the board

Block 4 of the board view: 3.9 × 4.9 mm on the top side, its centre 40.0 mm left of and 14.5 mm above the board centre (X right, Y up, as the enclosure tables); 3 footprints. The picture is the top render clipped around the block, the rectangle the extent of its footprints' courtyards.

Description

Clean 3.3 V linear regulator from a 5 V input rail using the TI TPS73733 fixed 3.3 V 1 A LDO. Intended for MCU, RP2040, TMC logic, encoder interface, and other low-voltage digital circuitry.

Ports

The brief's shape, edge, class and meaning for each port, then what the board wires it to.

Port Shape Edge Class Wired to Board net Board class GPIO Meaning On this board
+3.3V passive east PWR_3V3_LOCAL +3.3V /+3.3V PWR_3V3_NARROW Regulated output, 3.3 V fixed. The only logic rail, from the TPS73733 on the power sheet; always on while USB is present, as the InstrumentPort block requires
+5V passive west PWR_5V_LOCAL +5V /+5V PWR_5V_NARROW Input rail; also drives EN, so the regulator is on whenever it is present. VBUS after the USB block's Schottky (+5V_USB in the design record): the Line 0 pull-ups and every ESD array's clamp reference
GND passive west PWR_RETURN_LOCAL GND /GND PWR_RETURN_LOCAL Common return; regulator ground pin and thermal pad. Board ground; every BNC shell and camera pins 5 and 6

Parts

As placed on the board's sheet; 3 of 3 paired with the brief's references by symbol identity, the rest given the brief's role where the internal part has one, else the catalog's role slug; the placement is the Placement field of the board's symbol, else of the library's (D38); the manufacturer part and the LCSC number are the board's BOM's.

Reference Brief Part Value Role Placement Manufacturer part LCSC DNP
C1001 C14001 OW-PASS-CL05A105KL5NRNC 1uF Input bypass beside U1001.5 (EN), on +5V CL05A105KL5NRNC C307413
C1002 C14002 OW-PASS-CL05A105KL5NRNC 1uF Output capacitor beside U1001.1 (OUT), on +3.3V CL05A105KL5NRNC C307413
U1001 U14001 OW-PWR-TPS73733QDRBRQ1 TPS73733QDRBRQ1 Fixed 3.3 V LDO TPS73733QDRBRQ1 C523768

Operating Notes

  • Signal path: +5V -> U14001 (IN, pin 8) -> +3.3V (OUT, pin 1). EN (pin 5) is tied to IN, so the regulator is on whenever +5V is present; there is no enable control inside this block.
  • NR (pin 3) is left open: no noise-reduction capacitor is fitted. GND (pin 4) and the thermal pad (pin 9) return to GND.
  • C14001 (1 uF) bypasses the input, C14002 (1 uF) is the output capacitor; both are the catalog 0402 1 uF part. The rail is rated by the TPS73733 (fixed 3.3 V, 1 A class per the catalog description); derate for the board's actual load and dropout.

Placement and Routing

Regulator and bypass

C14001, U14001, C14002

U14001 regulates +5V to +3.3V with EN tied to IN. C14001 bypasses IN to GND, C14002 holds OUT to GND; NR is open.

  • Place: Place C14001 at pins 8 and 4 and C14002 at pins 1 and 4 with short local ground returns; tie the thermal pad to GND copper.
  • Route: +5V and +3.3V carry the rail classes (PWR_5V_LOCAL, PWR_3V3_LOCAL); the GND return of the pad is the regulator's heat path as well.

Library Identity

Block orb_weaver_private:5v_to_3v3_tps73733
Resolution the placed id is in the library
Brief design_blocks/orb_weaver_private.kicad_blocks/5v_to_3v3_tps73733.kicad_block/5v_to_3v3_tps73733.brief.yaml, the block's brief
Published sheet d047d03bb7b59ea0
Published PCB 7de227e948431743
Source lock symbol snapshot 1238ec2a0373421b, published 2026-10-14
Placed sheet 93e1c617af6f6baa: matches the brief: its 3 parts by internal part, every port by name and shape; the file is the board's copy under its own designators
Netlist check ok on 2026-10-15: every pin on the brief's net; 3 identity records differ, the board's own instances